TiareColor Permanent Conditioning Hair Color Cream 60 ml

•Permanent vibrant color : 100% coverage of gray hair, tone on tone, darkening and lightening up to 4-5 tones;

•Possibility to use in different techniques( glaze color, baths etc)

•Purity and quality pigments, modern production technologies;

•colour chart contains 129 shades;

•A wide range  of blondes;

•A comfortable oily-creamy texture that permeates every hair, which, as a result, ensures quality application and colouring;

•A composition of precious oils and mineral ferments, thanks to which the color process becomes a restoring care ritual for hair: nourishment and hydration, shine, conditioning, silkiness;

•Low ammonia formula.

Monoi de Tahiti oil is an exotic oil obtained from the flowers of the Gardenia Tahitian plant, which is also called tiare, which grows on the islands in the South Pacific Ocean, mainly in French Polynesia. Monoi oil contains hyaluronic acid, known as an effective natural moisturizer, as well as vitamins A, C and E, saturated fatty acids, natural antioxidants.

Avocado oil - Will fill the hair structure with minerals (magnesium, potassium, silicon, phosphorus), vitamins (A, B, PP, E, D, K) and fatty acids.

Argan oil is a storehouse of antioxidants and unsaturated fatty acids (oleic, linoleic, palmitic), which contribute to the hair structure from the inside to be regained, nourished and filled.

Macadamia oil - Contains proteins that help nourish the hair structure.

Mineral ferments - Technologies and perfect formulas help to reduce the sensitivity of the skin to allergic reactions.

•Permanent color 1: 1.5 (10 – 40 Vol)

•Demipermanent, color bath, glaze color  1: 2 (5 or 10 Vol)

•Lightening up to 4 levels  1: 2 (Superlightners range) just 30-40 Vol

•Grey hair 1: 1.5 (grossy hair 1:1) 20-40 Vol

Oxydant is a creamy liquid which makes the dye activated. One of the most important elements of hair coloring is choosing the correct volume of the oxidant, another way it is possible to get unpredictable result. To proceed the correct colour process it is important to use TIARECOLOR Oxidant Emulsion. 

0 Vol. - an emulsion that does not contain hydrogen peroxide! designed to reduce the volume of oxidizing emulsion, while maintaining the density of the mixture and color durability. The oxidizing emulsion must not be diluted with water. Water does not lower the percentage of hydrogen peroxide!

Example: 10 ml (20 Vol) + 10 ml (0 Vol) = 20 ml 10 Vol oxidant (detail calculation and mixing in the description for oxidants)

5 Vol. – use on damaged porous hair, color baths, repigmentation, glaze color, deposit of the pigment 

10 Vol. -  1 tone lift and ton on tone coloring

20 Vol. -  100%  grey hair coverage, 1-2 tone lift and copper red shades coloring

30 Vol –  100%  grey hair coverage incl. grossy hair, 2-3 tone  lift and copper red shades coloring, up to 4 levels with Superlightening range

40 Vol. – 3-4 tones lift ; up to 5 levels lift with Superlightening range; highlighting and balayage applications.

COLOR PREPARATION:  Use a non-metal bowl and whisk to prepare the color mixture.

•Permanent color:  ton on tone  /1-3 tones lift  mix 60 ml of the color with 90 ml of the TIARECOLOR Oxidazing Emulsion (10 – 40 Vol)

•Demipermanent, color bath, glaze color  mix 60 ml of the color with 120 ml of the TIARECOLOR Oxidazing Emulsion (5 or 10 Vol)

•Lightening up to 4-5 levels mix 60 ml of the Superlightners range color with 120 ml of the TIARECOLOR Oxidazing Emulsion 30-40 Vol

•Grey hair coverage mix 60 ml of the color with 90 ml of the TIARECOLOR Oxidazing Emulsion  (in a case of grossy hair mixing ratio 1:1) 20-30 Vol

Mix the color and oxidant until you get a smooth texture.

TIARECOLOR dye provides permanent perfect colouring result, vibrant colors, shine to the hair in a case of the correct hair analyse and selection of the shade, oxidant Volume, colour technique. It only works with natural hair pigment, meaning it won't lift colored hair. The prospectus inside the box should be taken into consideration in dye mixing and applications. The amount of mixture and application methods written on the site are recommendations. Mixing ratio, application method and processing time may vary depending on the application and shade to be used.

1. Natural and cosmetic hair tone.

2. Percentage of grey hair.

3. Natural tone and its undertone.

4. Oxidant selection.

5. Choose color and application (permanent coloring, toning, lightening).

Fisrst Apllication, Natural Hair Coloring and Color Changing: Start the application by leaving the 1.5-2 cm from the depth, applying the dye to the length and ends of clean dry hair. After processing of 20 minutes apply the dye to the roots and wait for another 20 minutes. Total precessing time: 40-50 minutes.

Hair growth color (Rootouch): Apply the mixture evenly on to the clean dry hair growth. Leave on for 35-50 minutes. For renewing the color on the length, 10 minutes before washing the hair apply color bath dye mix or 4 in1 NUTRI COLOR MASK .

! Attention: hair growth means  1.5-2 cm, in a case it more apply with the first application dyeing technique.

Toning, Glaze color, Color bath: Apply the mixture on the dry/wet clean hair, leave it on for 10 - 20 minutes and rinse.

Hair growth color (Rootouch) + Color revitalization care: an ideal combination - permanent hairgrowth color and hair length color revitalization (restores brightness, saturation of pre-colored hair without exposure to chemicals). Apply DesignLook 4in1NUTRI COLOR MASK or DesignLook COLOR MASK to clean, damp hair. Waiting time 10 - 40 minutes or depending of the hairgrowth color process time.

If the grey percentage is up to 100%, apply the desired color. In a case of  grossy grey hair, you should mix with natural color shades.  Start applying the dye from the front and finish at the sides.

After 20 minutes of processing, make cross check and you can apply a second application to the areas with intense grey hair.

After waiting for a total of 45-60 minutes, rinse with plenty of warm water until a clean water flows.

0- 25 %-         100% + 0%

25 - 50 %         .0/.00/.03/.3                    75%+25%

50 - 75 %         . .0/.00/.03/.3                 50%+50%*

75 - 100 %         . .0/.00/.03/.3                 25%+75%*

*adviced mix ratio with oxidazing emulsion 1:1,5(1), set time 50-60 min 

After the end of the exposure time of the dye mixture on the hair, rinse it with a plenty of warm water until water becomes clean. Apply TIARECOLOR Illuminating Post-Color shampoo and  Rinse it off. Repeat it again. To clean all chemical reduces, stabilize color and shine, restore the hair pH and porosity, apply the TIARECOLOR Illuminating Post-Color mask leave it or 10-20 minutes, then rinse. Spray TIARECOLOR TWO Bi-Phase Leave-In Conditioner all over your towel-dried hair. This action will help to close the cuticle, easy combing, nourishment and protection of the hair color. Start cutting and / or styling. 

Expert advice! No to get matt color effect do not wrap the hair in atowel, just carefully take off the water on it. We recommend using a microfiber towel . Do not wash the hair 48 hours after color.

SUPERLIGHTENERS (900 and 12 .. shades)

Supe lightners lift natural hair up to 4 tones. Mixing ratio 1: 2 with 30 – 40 Volume TIARECOLOR Oxidazing Emulsion. 

HairGrowth Lightening : Apply the mixture to the regrown hair roots. Exposure time 50-60 minutes. In 10-20 minutes. before the end of the exposure time, apply, if necessary, a toning mixture to refresh the shade along the length of the hair.

Attention: Supelightners dye doesn’t use for coverage of the gray hair and for toning hair. 

At 12th level shades  the amount of pigment for correcting the natural undertone more than shades 900-903 , it is always necessary to take into account the undertone based l of natural hair. On the color chart, the 12th level shades  visually darker than the 900th level. 

900 - super lightening blonde extra light

901 - super lightening blonde extra-light ash

912 - super lightening ash-iris blonde

902 - super lightening blonde extra-light iris

903 - super lightening blonde extra-light golden (use to clean cosmetic base)

12.021 - special blond pearl ash

12.022 - special blonde intense pearl

12.12 - special blond ash-iris

12.21 - special blond iris-ash

All super-lightening shades (900 and 12) can be mixed together.

Lightening the shades: 1 part shade + 1 part neutral  with 2 parts of the Oxidazing Emulsion 

Cosmetic base lift up to 1 tone , use 1 part Neutral : 2 parts of the Oxidazing Emulsion 20-30 Volume. The processing time is 20-30 minutes.

Concealer (mixtones) is a dye containing pure pigments without natural base that are used to enhance color itensity or neutralize unwanted shades during coloring.

BLUE - enhances ash and neutralizes copper and orange shades.

RED- enhances red tones, neutralizes greens.

VIOLET - neutralizes yellow tones.

YELLOW - enhances warm shades.

The dye that you have bought was prepared for professional use. There is only one tube of dye in the box. To prepare the mixture, you need to purchase the oxidant separately. Professional dyes are designed exclusively for dyeing hair. It is not suitable for different uses such as eyelashes, eyebrows, beards and mustaches. Choose non-metallic products to prepare and apply the mixture. Do not use metal accessories (clips, buckles, pliers, comb, etc.) during painting. Apply all dyeing processes to clean dry hair. Wear disposable protective gloves and a protective apron to prevent the paint from spreading around during the application. Do not exceed the recommended waiting time. Hair color is directly effective with the duration of the dye on the hair. Dyes that are left on the hair less than necessary will not give the desired results, and dyes that are left on the hair too much will also have negative results.

Hair dyes can rarely cause allergic reactions. Do certain susceptibility testing to prevent a situation like this. Apply the small amount of the mixture you will prepare after cleaning and drying behind the ear or elbow. Observe for 48 hours. If an allergic reaction is observed, never apply the dye. Do not apply to sensitive and irritated scalp or scalp damaged as a result of pathological conditions (eczema, psoriasis).